PRODUCTS
Phone：
15807996115 15807997225Technology：
15707990360
Tellerette Rose Ring With Thron
-
Plastic rosette ring (also named Tellerette ring or teller ring) is composed of small rings in radial arrangement and a big ball. As the gap filler can be at a higher liquid holdup, the tower can remain liquid longer, thus increase the gas-liquid contact time, improve the efficiency of mass transfer packing.Tellerette rose ring with thron increase the surface area,can reach the higher efficiency.
-
Email:bella@www.trialschedule.com
Phone:0799-7605234
Details
Tellerette Rose Ring With Thron
Plastic rosette ring (also named Tellerette ring or teller ring) is composed of small rings in radial arrangement and a big ball. As the gap filler can be at a higher liquid holdup, the tower can remain liquid longer, thus increase the gas-liquid contact time, improve the efficiency of mass transfer packing.Tellerette rose ring with thron increase the surface area,can reach the higher efficiency.
Advantages:
> Low pressure drop
> High flooding point
> Small specific gravity
> Uniform gas-liquid contact
Application : Extensive used for gas absorber, cooling tower, deaerator, reactor and other gas -liquid contact systems.
Material:
Plastic tellerette rose ring with thron is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene(PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride(CPVC),polyvinylidene fluoride(PVDF).
Physical & chemical properties of plastic tellerette rose ring with thron:
|
Property /Material
|
PE
|
PP
|
RPP
|
PVC
|
CPVC
|
PVDF
|
|
Density g/cm3
|
0.94-0.96
|
0.89-0.91
|
0.93-0.94
|
1.32-1.44
|
1.50-1.54
|
1.75-1.78
|
|
Application temperature
|
90
|
>100
|
>120
|
>60
|
>90
|
>150
|
|
Chemical corrosion resistance
|
good
|
good
|
good
|
good
|
good
|
good
|
|
Compression Strength
|
90
|
>100
|
>120
|
>60
|
>90
|
>150
|
Technical Date
|
Material
|
Model
|
Size
|
Number per volume
|
Surface area
|
Void Volume
|
Dry Packing factor
|
|
D*H mm
|
n/m3
|
m2/m3
|
%
|
m-1
|
||
|
PP
|
Dg47
|
47*19*(3*3)
|
23800
|
200
|
88
|
271
|
|
Dg51
|
51*19*(3*3) | 22500 | 195 | 88 | 255 | |
| Dg73 | 73*28*(3*3) | 7000 | 145 | 89 | 180 |
